Vertical Axis Wind Turbine

Vertical Axis Wind Turbine Video Clips.

This wind turbine is based on the Lenz II design which measures 4 ft tall X 3 ft in diameter. The parts can be purchased at www.WindGenKits.com It has a 12 magnet, dual rotor alternater with 9 coils. Each coil is 70 turns. The wing construction is a steel frame made of laser cut ribs with tubular spars and a trailing edge. The ribs fit into notches on the spars and was welded together. The skin is .030" aluminum that has been fastened with rivets. The rotating assembly spins on a fixed shaft. Bearings and wing spokes are bolted to the center tri-star carrier plates. The wings can be quickly removed and swapped. Currently this turbine feeds a small bank of 2 GC-110 wet cell batteries wired in series for a 12V system. AC output is provided by a 1500W inverter.

Keywords: vertical, axis, wind, turbine, VAWT, generator, axial, flux, alternator, Lenz, II, savonius, darrius, alternative, power, electricity, green, energy, renewable, how, to, build, windturbine, hawt, windgenkits, rare, earth, magnet, PMA, permanant, piggot, darrieus, savonious, diy

See Also : Generator Buying Guide emergency generator generator manufacturers

Check Out 28 inch HyperSpin Aluminum Wind Turbine Blades (Set of 5)

28 inch HyperSpin Aluminum Wind Turbine Blades (Set of 5) Review

Click To Buy Best Price from Amazon

Product Feature

• 28 inch aircraft-grade aluminum wind turbine blades
• Stainless steel hub with 17 mm mounting hole
• Fasteners and everything needed for assembly!

Product Overview

The best low wind rotors for small wind generators! For generators with larger permanent magnet motors, our five aircraft-grade aluminum HyperSpin wind generator blades are designed to spin fast and provide good power! If you live in an area that frequently sees winds above 12 mph, then these wind turbine blades will work well on motors rated for 1000 Watts or more, with a "cut in" speed of 300 rpm or less. If your motor does not fit this description, then see our three-blade HyperSpin series or our three-blade TurboTorque series. The five-blade HyperSpin blade set works well on permanent magnet alternators in the 500 Watt and under category, and on the following small wind generators and PMAs: AirX wind generators, Hornet wind generators, WindBlue PMA, Any other wind generator/PMA in this power range. The five blade set will deliver more torque at a lower start-up wind speed to your PMA-driven wind turbine compared to our three blade model. However, it also gives you a lower rpm than a three-blade set, so be sure to check the specs on your generator before selecting the appropriate blade combo.The wind turbine blades come with a stainless steel hub with a 17 mm center mounting hole.

Read More ...

---

See Also : Generator Buying Guide 3 phase generators for sale

Category 5 hurricane wind turbine

Category 5 hurricane wind turbine Tube. Duration : 2.43 Mins.

www.hurricanewindpower.com Hurricane Wind Power Wind Turbine Technologies LLC Mark I category 5 TM Wind Generator video demo. Turbine is 32 volts at 7 km / h winds. This wind generator is made with a PMA, which can be 12 volts and with a low 40 rpm pma make this great light for direct drive applications and to meet the wind VAWT

Tags: windmax, wind turbine, wind generator, missouri wind and solar, jeffmolly1, rapter blades, windynation, presto wind, hurricane wind power, wind blue, tlg, ginlong, pma, permanent magnet alternator, residential wind turbines, green power science, hornet blades, windmax wind turbine, air x, windenergy7, windmaxenergy, hornetblade, sclimate, environment, global warming, rust, leamyvideo, vawt, hawt, low wind pma, diy wind generator, south west wind power, hurricane cat 5

My Links : Generator Buying Guide quiet diesel generator winco pto generators winco generators reviews

24PC 2x1x1/2" Wind Turbine Generator Neodymium Magnets - Strong N42 Rare Earth

Availibility : Usually ships in 4-5 business days

Technical Details

• Top Quality Neodymium Iron Boron (NDFeB) Rare Earth Block Magnets
• Powerful N42 Grade, stronger than N40, N38 and N35
• Pull Force: Over 72 lbs, Great performance, Wholesale Price
• 2" long x 1" wide x 1/2" thick, magnetized through thickness 1/2", poles on the 2"x1" flat surfaces
• Quantity: 24 strong magnets per package